How To Know If Your Ellijay Log Home Needs Chinking
Chinking for Ellijay log homes can be used for aesthetic reasons or can be done to ensure the elements stay outside. Some homeowners like the look of chinking while others don’t want to see it on their home. Typically, chinking is required on your Ellijay log home if you meet any of the following criteria:
- You can stick your hand from the inside of your Ellijay log home to the outside of your log home.
- You want the joint between your logs to stand out.
- You want the joints between your logs to be greater than 3/4”.
Chinking is designed to stand out from your logs because of the heavy surface texture and the available colors. It is important to remember that this material can only do so much. The performance of a product, such as Log Jam will depend a lot on the application of the material. When applying chinking material take the following items into consideration:
- Ellijay House Logs that exceed a 20% moisture content will put an abnormal amount of stress on a chinking joint and will require a wider joint.
- The chinking joints should be approximately 1/12” the size of the diameter of your house logs. (Example: A 12” log would require a 1” chinking joint.)
- All chinking materials performs best when they have 2-point adhesion. This is accomplished by using some type of backer rod.
- Chinking should be applied between 40-90 degrees and can take 3 weeks to fully cure.
- Chinking will remain pliable throughout the lifetime of the product.
- Chinking should be done after a compatible stain is applied.
In conclusion, chinking for Ellijay log homes can provide a weather-tite seal or aesthetic appeal. In either case, it is important to remember that this type of material will perform much better if the proper guidelines are followed.
Article Source: http://EzineArticles.com/1104743
|
|
|
|
 |
